Deviations
Configuration
Use the + sign to create deviations, which are shown above the basic diagram. To remove a deviation, click the red trash can. By default, an absolute and a percentage deviation are shown. The checkbox (de)activates the visibility of a deviation.
Configuration Pop-Up
The checkbox Enabled sets the visibility of the selected deviation.
- Label: Name the deviation.
- Type: Choose between absolute or percentage deviation.
- Minuend: The value to be used as a reference value.
- Subtrahend: The value that is checked to see how far it deviates from the reference value.
Info |
---|
Calculation: Absolute: minuend- subtrahend Percentage: (minuend - subtrahend) / | subtrahend| |
The order in which these deviation axes are displayed corresponds to the order in the Deviations Configuration.
Calculate Deviations from NULL
Specifies whether deviations should also be calculated from NULL values.
Good / Bad / Neutral Color
At this point, define the color with which positive (Good), negative (Bad) or neutral (Neutral) deviations are displayed.
Negative Deviation Is Good
This option inverts the color scheme for the colors of the deviation. For example, negative values can be displayed with green color when using the original colors.
Pin Line Black
This option colors the needle line in the deviation graph black.
Deviation Bar Width for Scenarios
The Bar width greift dann auf die absolut Deviation (dafür muss die Option Width applies to the bar width of the absolute deviations. (Applies if the option 'Scenarios in Deviation' on the Data Tab aktiviert sein is activated)'.
Use Pin Head Color
(De)activates the selected Pin Head Color. If deactivated, the stored color values of the deviations are applied (default: green/red)
Pin Head Color
The head color of the needle in the percentage deviation diagram. The color is not applied to the needle heads in the base chart.