Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »


Chart

Type

You can select the desired diagram type by clicking on the corresponding icon.

Orientation

All diagrams can be used horizontally and vertically aligned:

  • horizontal for developments over time (Time),
  • vertical for structural comparisons (Structure).

Base Chart

The Base Chart checkbox shows and hides the basic chart. This allows deviation charts to be used without basic charts.

Chart Type By Series

To display combination charts, select the desired chart type from the dropdown (None, Bar, Line, Offsetbar, Pin, Stackedbar, Waterfall).

Deviations

Configuration

Use the + sign to create deviations, which are shown above the basic diagram. To remove a deviation, click the red trash can. By default, an absolute and a percentage deviation are shown. The checkbox (de)activates the visibility of a deviation.

Configuration Pop-Up

The checkbox Enabled sets the visibility of the selected deviation.

  • Label: Name the deviation.
  • Type: Choose between absolute or percentage deviation.
  • Minuend: The value to be used as a reference value.
  • Subtrahend: The value that is checked to see how far it deviates from the reference value.

Calculation:

Absolute: minuend- subtrahend

Percentage: (minuend - subtrahend) / | subtrahend|

The order in which these deviation axes are displayed corresponds to the order in the Deviations Configuration.

Calculate Deviations from NULL

Specifies whether deviations should also be calculated from NULL values.

Good / Bad / Neutral Color

At this point, define the color with which positive (Good), negative (Bad) or neutral (Neutral) deviations are displayed.

Negative Deviation Is Good

This option inverts the color scheme for the colors of the deviation. For example, negative values can be displayed with green color when using the original colors.

Pin Line Black

This option colors the needle line in the deviation graph black.

Deviation Bar Width for Scenarios

The Bar Width applies to the bar width of the absolute deviations. (Applies if the option 'Scenarios in Deviation' on the Data Tab is activated).

Use Pin Head Color

(De)activates the selected Pin Head Color. If deactivated, the stored color values of the deviations are applied (default: green/red)

Pin Head Color 

The head color of the needle in the percentage deviation diagram. The color is not applied to the needle heads in the base chart.


Title

Title Text

Gyou can enter a title for the diagram here. If the checkbox is activated, this title is displayed.

Layout

Padding

Padding in [px] sets a border around the diagram.

Spacing

Spacing also in [px] defines the distance between the basic and deviation diagram.

Space Proportion For Base Chart

Place that the Base Chart takes up. Formula for determining the space: Factor / (sum of all factors)

Space Proportion For Deviation Charts

Space that a deviation diagram takes up. Formula for determining the space:
Factor / (sum of all factors)

Bsp. Verhältnisse zeigen

  • No labels