Deviations (charts)

Owned by Gregor Große-Bölting (Unlicensed)
Last updated: May 02, 2019 by Stefanie Schröder (Unlicensed)
1 min read


Deviations

Negative Deviation Is Good

Activate the Invert checkbox, if positive deviations between the measurement values and the underlying values are not assessed as good, e.g. for actual plan cost comparison.

Calculate Deviations From NULL

Specifies whether deviations should also be calculated from NULL values. Resulting "∞" characters get the CSS class infinityLabel.

Deviation Good Color

Specify the color for the positive deviations.

Deviation Bad Color

Specify the color for the negative deviations.

Deviations Config

See Deviation Configuration.

Deviation Visibility

Enter comma-separated zero indicated which deviation graphs should be drawn, for example 0,2. An empty field causes all created deviations to be drawn. 

Deviation Pin Line Black

Whether the line of the deviation pins should be black (or red / green).

Deviation Bar Size Factor

The percentage width of the deviation bar depending on the element width in the base chart (only possible if data types are used).