With the Value Format you define the way values are displayed in the diagram. You can access the configuration by clicking on an element in the list. If this option is activated, the number formatting of the data source is used. Define the number format using the following options: For the Format Type Time, a system of units can be configured with the help of the Time Units Property, which in the default setting consists of hours and minutes. Each number formatted in this way is then splitted in its values for each unit. The order of the unit list defines their relationship from the largest unit (top) to the smallest unit (bottom). Each unit contains the following options: Determine the mode that controls the data labeling. Three modes are available: Adjusts the collision algorithm of the labels of the auto mode of the value labels. The smaller the value, the more sensitive the algorithm is to collisions. Negative values are also allowed. (Note: Bold labels are not considered by the collision algorithm, so they always appear). This option draws a colored area behind the Value Labels. With Background Color you define the desired color. With Background Color you define the desired color of the area. Define from which series the element label is visible. If this option is enabled, you can use the subordinate settings to control which labels are displayed according to certain criteria. Consequently, only those labels that match the selected criteria are displayed. The following options are available: The first label of a series is displayed. The last label of a series is displayed. The minimum value of each series is displayed. The maximum value of each series is displayed. All values before a separator are displayed. This option depends on the settings under Separators. This option displays local minima and maxima. What a local minimum/maximum is can be controlled with the option Minimum Peak Size in %. Determines how much values must deviate from their neighbors to be considered a local minimum/maximum. The peak calculation only refers to the previous value; the following value is not taken into account. This property determines the font size in pixel. Define the global font. You can choose between Arial, Tahoma, Lucida Console, Verdana and Calibri or type in the name of a font which is installed on your system. This property determines the font color as HEX code. Alternatively, the Color Picker can be used. If the Enable checkbox is activated, the title will be displayed. Enter a Title for the charts here. Multiline texts will be rendered accordingly, i.e. the line break will be applied. The following HTML tags can be used for formatting: 'b', 'i', 'p', 'span', 'div', 'br', 'h1', 'h2', 'h3', 'h4', 'h5', 'h6', 'hr', 'ol', 'ul', 'li' and 'blockquote'. For the following result this input is necessary: ACME Ltd. Activate the checkboxes to display the data label on the left/top of the data series. Activate the checkboxes to display the data label on the right/bottom of the data series. Enter the desired labeling of a series manually. If this option is enabled, you can define a custom label for each series. Otherwise, the series labels are set data-driven. Enter the desired label of a series manually here. Maximum width of the data series labels, up to where the padding is scaled. If this value is exceeded, the labels are cut off. (De-)activate the display of the category label using Enable. The checkbox controls row-by-row (level x) whether the category labels should be suppressed or displayed. If this value is greater than 0, it indicates the reserved space for the category labels in pixels. If the length of the labels is greater than the specified width, they are shortened by omission points. For values smaller or equal to zero, the reserved space is calculated automatically. Max Category Label Width can only be set in Structure Mode and with deactivated hierarchical labels (Hierarchical Label Display set to false). Controls line by line (level x) whether repetitive category labels should be suppressed or displayed. Enables a hierarchical display of category labels. The category labels of each member are displayed in a separate column. The hierarchical display is only possible in Structure Mode. The character or string in place of which category labels are split across multiple lines. For example, using a space for the label "ACT Jan 2001" would make it a three-line label. Specifies the angle by which the category labels are rotated. The rotation is counterclockwise. If this option is enabled, the category labels in Time mode will have a maximum width of the specified category width. If the labels are longer, they will be truncated by ... cut off. This setting derives the category labels from the linked measures if no dimension is specified in the category field in the data pane. Activate the check boxes to display the axis label on the left/top of the data series. Activate the check boxes to display the axis labeling on the right/bottom of the data series. Enter the desired labeling of the axis manually. The character or string where the axis labels are split over several lines (similar to the property line break category labels). If this check mark is set, tooltips are displayed on the diagram at runtime, showing detailed information for the corresponding element. The tooltips cannot be activated in Power BI via the GPS. Please use the visualization Pane in Power BI and activate the Quick Info setting to display the tooltips in the graphomate charts. Define the number format using the following options: Here you can define your own CSS for formatting the graphomate charts.Value Format
Use Pre-Formatted Data
Value Format Pop-Up
Time Units Pop Up
Value Labels
Label Positioning
Collision Adjustment [px]
Background
Background Color
Visible Element Labels
Label Picking
Force First Value Label
Force Last Value Label
Force Min Value Label
Force Max Value Label
Force Before Separators
Force Peak Labels
Minimum Peak Size in %
Check Only Leading Values For Peak
Font
Size [px]
Family
Color
Title
Title Text
ACME Ltd.
P&L by Segment
2021 AC, BU
<b>P&L</b> by <i>Segment</i>
2021 AC, BUSeries Labels
Left/Top
Right/Bottom
Series Label
Custom Series Labels
Max Series Labels Width [px]
Category Labels
Visibility
Max Width [px]
Suppress Repetition
Hierarchical Label Display
Line Break Category Labels
Category Label Rotation [degree]
Crop Category Labels
Category Labels from Measure (only in Power BI)
Axis Labels
Left/Top
Right/Bottom
Axis Labels
Line Break Axis Labels
Tooltips
Value Format Tooltips Pop-Up
Scripted Formatting
Manage space
Manage content
Integrations