2021.2.1

Bugfixes

• Lumira Designer: Fixed pdf export not working properly

• Lumira Designer: Fixed an issue where the information for the measure member on tooltips was not shown properly

• Lumira Deisgner: Fixed an issue where existing scenario css classes on line charts could not be deleted

• Lumira Designer: Fixed an issue where single highlights were broken while changing visible series

• Power BI: Fixed an issue where demo data was displayed, when filtering on a member that doesn't exist

• Fixed an issue with incorrect manual scaling using deviation charts only

• Fixed an issues where using stacked bar mode ‘negative’ and linechart at the same time was not possible

• Fixed an issue where resetting the category linebreak option wasn't possible

• Fixed an issue with overlapping multihighlights in structure mode

• Fixed an issue using outlier mode long where outlier labels collide with the outlier pins

• Fixed an issue where the outlier labels were overlapped by the category axis

• Fixed an issue on where percentage deviations labels were cut away when using pin head mode back

• Fixed an issue where the scenario legend was overlapped by the charts itself

Improvements

• Calculation of top N small multiples along a custom dimension

• Determination of top/bottom N members of a custom dimension within a chart

• New property "Scenario By Data Selection" allows assigning scenarios to certain categories or member

• SAC/Tableau/Power BI: series labels are now derived from datasource by default

• Power BI: Introducing a new template gallery on start up providing 5 templates ready for quick use

• Selecting a whole category by clicking on the corresponding category label is now possible

• It is now possible to scroll the chart if there is not enough space for all categories using the new "Minimal Category Width" property

• New option "Crop Category Labels" allowing to crop overlapping category labels in time mode

• New property "Offset per Series" allowing to set an offset for each series separately

• Detailed scripting documentation for SAC

• Tooltips for value axis and reference lines

• New stacked bar mode "Negative2" which is a combination of the already existing modes "Negative" and "Real Numbers"

• New property "Apply Dot Colors to Lines" which allows using the same color for lines and dots in line charts

• Pin width for pin charts and percentage deviation charts are now separately adjustable

• Line dot radius x/y default set to 5 px

• Improved label spacing for offsetbar deviation labels top

• The font color is now applied to the scenario legend as well.

• SAC/Tableau: “Show title” default set to false

• SAC/Tableau/Power BI: Deviation charts are disabled by default now

• Power BI: pre-formatted value labels from datasource can now be displayed using the "Use Pre-Formatted Data" option

• Power BI: Power BI tooltips value format is now customizable

2021.2.0

Bugfixes

• Lumira Designer: Fixed pdf export not working properly

• Lumira Designer: Fixed an issue where the information for the measure member on tooltips was not shown properly

• Lumira Deisgner: Fixed an issue where existing scenario css classes on line charts could not be deleted

• Lumira Designer: Fixed an issue where single highlights were broken while changing visible series

• Power BI: Fixed an issue where demo data was displayed, when filtering on a member that doesn't exist

• Fixed an issue with incorrect manual scaling using deviation charts only

• Fixed an issues where using stacked bar mode ‘negative’ and linechart at the same time was not possible

• Fixed an issue where resetting the category linebreak option wasn't possible

• Fixed an issue with overlapping multihighlights in structure mode

• Fixed an issue using outlier mode long where outlier labels collide with the outlier pins

• Fixed an issue where the outlier labels were overlapped by the category axis

• Fixed an issue on where percentage deviations labels were cut away when using pin head mode back

• Fixed an issue where the scenario legend was overlapped by the charts itself

Improvements

• Calculation of top N small multiples along a custom dimension

• Determination of top/bottom N members of a custom dimension within a chart

• New property "Scenario By Data Selection" allows assigning scenarios to certain categories or member

• SAC/Tableau/Power BI: series labels are now derived from datasource by default

• Power BI: Introducing a new template gallery on start up providing 5 templates ready for quick use

• Selecting a whole category by clicking on the corresponding category label is now possible

• It is now possible to scroll the chart if there is not enough space for all categories using the new "Minimal Category Width" property

• New option "Crop Category Labels" allowing to crop overlapping category labels in time mode

• New property "Offset per Series" allowing to set an offset for each series separately

• Detailed scripting documentation for SAC

• Tooltips for value axis and reference lines

• New stacked bar mode "Negative2" which is a combination of the already existing modes "Negative" and "Real Numbers"

• New property "Apply Dot Colors to Lines" which allows using the same color for lines and dots in line charts

• Pin width for pin charts and percentage deviation charts are now separately adjustable

• Line dot radius x/y default set to 5 px

• Improved label spacing for offsetbar deviation labels top

• The font color is now applied to the scenario legend as well.

• SAC/Tableau: “Show title” default set to false

• SAC/Tableau/Power BI: Deviation charts are disabled by default now

• Power BI: pre-formatted value labels from datasource can now be displayed using the "Use Pre-Formatted Data" option

• Power BI: Power BI tooltips value format is now customizable

User Interface

• General improvements of usability and presentation of properties

• Sorting of entries in lists by drag and drop

• “Duplicate item” functionality for list entries

• List elements can be enlarged by drag handle at the bottom

• Selection of data in filter panel optimized + select all

• Filter export and import for quick settings

• Search not showing some properties is fixed

• Update of changes from and to properties in search fixed

• Special characters are now decoded correctly

• Improved operability for separator settings

2020.4

Bugfixes

• fixed unwanted linebreak in title
• fixed element labels of the lines can protrude into the category labels for line and waterfall charts in structural mode
• fixed an issue that lead to the software certificate being recognized as invalid
• fixed an error  for the stackedbar chart with "Stacked Sums Visible" disabled" combined with "Chart Type by Series"
• fixed the value axis tooltip is not always displayed

Improvements

• introducing a new appearance of the additional properties sheet which includes an improved categorical ordering and now allows to change every chart property 
• new scripting method "getSelectedMembers" which will return all selected member keys of a given dimension
• introducing the possibility to select/deselect multiple chart elements in the runtime
• introducing a new (value) label format mode called "universal", which combines the functionalities of the previous formats and also allows further settings
• the new property "Scenario By Series" allows to assign a scenario to an entire series and is adjustable via an optional scenario legend in the runtime
• whether to show scenarios in deviations or not is now adjustable
• deviation fom null is now adjustable for offsetbars charts
• usage of custom fonts is now available
• the property "Activate on new Data" is no longer adjustable (default: false)
• new export interface for png and excel export
• new data debugger appearance

2.8.0

Bugfixes

• fixed double category axis when using different charttypes by series

• fixed issues where scaling was broken using infinty outliers in percent deviation chart
• negative infinite values are now handled correctly for deviations and highlights(single/multi)
• the context menu option filter and hide is now available again
• fixed manual data input with deviation chart causes error
• fixed a display error of category labels when using hierarchical display in time mode
• fixed an issue where the setProperty() scripting function had to be called twice
• the setProperty() scripting function is now working properly when using start event scripting
• fixed a problem using the graphomate charts with the SAP built-in function moveComponent()

Improvements

• increased the number of Data series from 10 to 12
• introducing a new feature called "Highlight Group" highlighting elements in the runtime when hovering (for more information s. Interactivity at runtime)
• parallel loading of data sources is now possible in conjunction with the graphomate charts
• statistical properties (average, median, linear regression) will now be adjusted according to the category count
• the series/datatype styles now apply to the outliers too
• the datatype css class is now also available for the outliers
• when using the technical component "authoring" design time overlays will no longer be shown in the browser
• the last element of a waterfall chart is now a result by default
• if label shadows are enabled the automatic coloring of elementlabels located within a stackedbar chart is now disabled
• improved label positioning for line chart labels
• improved space provision for multihighlights
• improved space provision for waterfall labels close to the category axis
• new data type entries in the datatype selector will now have a default width of 40%
• the deprecated "dt" attribute is now removed from all html elements

2.7.1.7

Bugfixes

• fixed short line with multi highlights and outliers
• fixed missing category labels, when member names started with an underscore

Improvements

• bold hatched patterns introduced
• improved responsiveness of user highlights
• category count now considered for statistics

2.7.1.1

Bugfixes

• data of a deleted series is no longer persisted
• correct display of the Deviations Configuration in the Additional Properties Sheet after starting or reloading the charts
• incorrect user entries in the Multihighlight Configurations are intercepted
• if in the percentage deviationchart all values are outlier, then these are now also displayed
• series labels now consider the set padding
• the space requirement for deviation charts when using hidden series is now determined correctly
• Java Script fixed bug for invalid data points
• incorrect positioning of the zero value replacements in the offset bar chart with missing series fixed

Improvements

• own chartpicker as standalone component for the charts available
• optional representation of the mean, median, or linear regression for each (visible) series
• new tab for interaction with the graphomate server
• set properties can be saved as a template
• apply custom Rulesets from the new rulesbuilder for properties Data Types, Waterfall Calculation Path, (Extended) Number Format
• display of the Rulesets applied to a chart in the design time
• Rulesets can also be applied to a chart via scripting language
• custom width for category labels in Structure Mode
• hierarchical display of category labels by members in Structure Mode possible
• each series in the linechart now has its own CSS class
• set Data Types are appended to the CSS class names of the lines and labels
• the % sign is now removable for stacked bar charts in percentage mode
• the appearence of the tooltips can be changed via CSS classes
• Visibility of tooltips are scriptable
• with only zero values, the axis is no longer displayed in the center
• renaming the property Scaling Helper Bar Color to Scaling Helper Bar Line Color
• new property Scaling Helper Area Color for setting the area color of the Scaling Helper in Area Mode
• the Context Menu entries are now scriptable
• serial IDs are now attached to the CSS class names of the series labels
• new property Activate On New Data to optionally activate the event On New Data Arrival
• Pin Head Mode Options changed from front or back to front / top aligned or back / center aligned
• the property Font Color now also affects the title
• new icon in the Additional Properties Sheet for the visibility of series

2.6.4

Bugfixes

• fixed context menu for Lumira Designer 2.X
• fixed category count issue with stacked bar chart
• highlighting was broken when used with charttype per series

Improvements

• added getVisibleElementLabels and setVisibleElementLabels as scripting functions
• added generic setter/getter for BIAL script 
• added property binding for: scalingHelperValue, manualScaleMax, manualScaleMin, positiveOutlierThreshold, negativeOutlierThreshold, positiveOutlierThresholdPercent, negativeOutlierThresholdPercent

2.6.x

Bugfixes

• sporadische Darstellungsfehler von Ausreißern gefixt
• Automatische Breite und Höhe wird nun für den Excel Export korrekt ausgelesen
• Tooltips im negativen Stapel gefixt
• Darstellungsfehler bei einzelnem, kleinen Abweichungschart behoben
• Wasserfalloptionen wurden manchmal nicht korrekt eingeblendet
• nicht erreichbarer PNG-Export-Button gefixt
• Probleme mit Labeln im negativen Stapel behoben
• Platzausnutzung des Titels verbessert
• Platzausnutzung der Multihighlightbeschriftung verbessert
• Darstellung von 0-Outliern verbessert
• Serienpriorisierung der Kollisionslogik verbessert

Improvements

• Charttyp ist nun pro Serie separat im Serienselektor festlegbar (integriertes Layering)
• die Anzeige der Stapelwerte kann nun auch als Anteil von 100% darstellbar gemacht werden
• Stapelsummen müssen nicht mehr nur als Summe der Beträge berechnet werden ("echte" Summen)
• Neue Property "Stacked Bar Mode" für die Wahl von Normalem, Negativem, 100% und Stapel ohne Betragsaddition eingeführt
• Prozentuale Outlier Thresholds implementiert
• NULL, Infinity und 0-Replacements eingeführt
• Neue Darstellung der prozentualen Abweichungsköpfe nun auch optional hinter den Pins (Pin Head Mode)
• Wahlmöglichkeit der Pinkopffarbe (Show Pin Head Color und Pin Head Color)
• Schatten wird nun als Hintergrundfläche gezeichnet
• Threshold Lines können festgelegt werden
• Hierarchylevel werden nun als CSS-Klassen an die Elemente geschrieben
• Linien- und Pinköpfe können nun als "Wedge" angezeigt werden
• Label Picking: Label können nun nach verschiedenen Kriterien selektiv ein- und ausgeblendet werden
• Zusätzliche Option eingeführt, um die Ticks der Werteachse zu definieren
• Tooltips erhalten nun CSS-Klasse, welche den Kategorieindex enthält
• Redesign des Additional-Properties-Sheets
• Formatted Data kann nun dargestellt werden (Option Use Formatted Data)
• Verwendung der Outlier-Thresholds verbessert

2.5.2

Bugfixes

• Tooltips bei Stapeln mit Null-Werten zeigten Beschriftungen der falschen Serie an.
• Fehler mit Null-Werten im Wasserfall-Chart behoben
• Problem mit verschobener Achse in manchen Konstellationen behoben
• Textbreitenausmessungselement nicht mehr gelegentlich sichtbar

Improvements

• Die Elemente-Labels lassen sich nun Serien-spezifisch ausblenden. Dies kann mit Hilfe der blauen B-Buttons bei der Serienselektion getan werden.
• Weiterhin werden bei der automatischen Ausblendung der Labels die Labels von vorderen Serien priorisiert
• die manuellen Kategorie-Labels lassen sich nun über das BIAL-Skript setzen
• die Linien im Liniendiagramm werden nun immer schwarz gezeichnet
• das Tooltip ragt nun nicht mehr nach links aus dem Bildschirm bei sehr kleinem Chart
• die Farbe des Pinkopfes von Abweichungsdiagrammen lässt sich nun festlegen

2.5.1.4

Bugfixes

2.5.1.1

Bugfixes

2.5.0

Bugfixes

2.4.12

Bugfixes

• error handling IBCS oulier mode long
• interception of special behavior of deviation labels in offsetbar charts

2.4.7

Improvements

• Support SAPUI5 M mode
• Possibility to toggle between multiple colors by clicking when using userhighlights
• Export graphomate charts from SAP Design Studio into Microsoft Excel
• Multi highlighting scriptable
• Multiline axes labels
• Value axis can now be set on both sides of the chart
• Better support for PDF-export from BIExcellence
• No suppressing of data labels if data type is set to bold
• Introduced control properties, to adjust which members and measures are displayed in the category labels

• Bei fixer Anzahl an Werten, werden überschüssige Werte nicht mehr angezeigt
• Diverse Themen mit Outliers und Highlights verbessert
• Prozentabweichungen werden nicht mehr gestaucht
• Zwischensummenvorzeichen vom Wasserfall gefixt
• Invisible series werden nicht mehr bei der Maximum-Berechnung berücksichtigt
• Ausreißer reagieren nun auf LabelMode
• Titel reagiert nun auf Padding
• getClickedPositionValue im Strukturmodus gibt nun richtige Werte
• Resizing Probleme mit dem Titel gefixt
• Update auf Wasserfall für Abweichungen funktioniert nun

2.2.0

Bugfixes

• Kollisionslogik bei Labels überarbeitet und Parameter "Collision Adjustment" für Feinjustierung eingeführt
• Skalierung über Extended Value Format nun auch bei 10hoch1 korrekt
• Tooltipps komplett überarbeitet
• umfassende Korrekturen und Optimierungen der Zeichenroutinen

Improvements

• Wichtig: Serienindexierung über Skriptsprache vereinheitlicht, beginnen jetzt alle bei 1- Demo-Daten werden zur Run-time nicht mehr gezeigt
• Clear Button für Datenserien im Additional Property Sheet
• Balken-Elemente haben verbesserte CSS-Klassen, um genauer angesprochen werden zu können
• Charts können manuell auch mit abgeschnittener Werteachse abgebildet werden
• Fontfarbe Labels wählbar
• Schatten für Labels für bessere Lesbarkeit bei geschichteten Diagrammen
• Neue Property LOCALE, um Werte in Abhängigkeit der Sprache der Datasource zu formatieren
• Punktediagramm durch Pin Width = 0
• Deviation Labels können über Skript gesetzt werden
• Suppress Repeating Category Labels per row möglich
• Wasserfall UI-Elemente werden nur dann eingeblendet, wenn Wasserfall ausgewählt ist

2.1.3

Bugfixes

• NoData Fall besser abgefangen
• PNG-Export immer an, ließ sich nicht ausschalten
• Multihighlight reagierte nicht auf Good/Bad-Invertierung
• Highlight Checkbox war initial immer angehakt
• Skalierungsfehler im Extended Format Editor behoben

Improvements

• Data Debugger eingebaut, welcher Datensnapshots und Remote-Logs ermöglicht ((Alt+Strg+Shift) dann q+w)

2.1.0

Improvements

• Exportmöglichkeit der Diagramme zur Runtime als PNG
• Tooltipps möglich
• Multi-Highlighting umgesetzt
• Vollständige Überarbeitung der Wasserfalllogik
• Vereinfachte Darstellung der Werteachse
• Nullwerte können unterdrückt werden 
• Datenarten bestehen nun nur noch aus Großbuchstaben 
• Abstimmung Datenarten mit graphomate tables 
• Infos über Eigenschaften werden nun zur Design Time oben rechts angezeigt
• Neue Skriptmethoden für Charts
• Fehler bei Nutzung der Separators korrigiert